Console Extender
11
Receiver Audio Output Connector, DB15 – Female
If a serial communication is needed, connect a PC’s serial port to RS232, a DB9 male
connector. The Serial port supports all baud rates to 115 K bps
3. Configuration & Operation
3.1 Sender Front Panel Controls and indicators
Keep the
VIDEO ADJUST
switch in RUN mode for normal operation. Set it to CAL
(calibrate) mode to adjust the video at the remote unit per the following descriptions
3.2 Receiver Front Panel Controls and indicators
The Console Extender-Remote unit can be operated in two different modes, which are
RUN -mode and CAL-mode.
In RUN-mode, all LEDs and buttons for video adjust are off. And tapping on the control
buttons have no effect. This prevents accidental and unintended video adjustment,
though it is possible to make adjustments in RUN mode by long pressing the Select
button as described below.