Mini-Cat®
Brand HDMI™ Extender
5
Figure 3 – Locking HDMI Cable
Connect the HDMI connector labeled OUTPUT to the sink device (HDTV,
Projector, etc)
Using a Cat5e or Cat6 cable, connect the RJ45 connectors from the Sender
to the Receiver.
Plug in the power supplies at the receiver and at the sender
3. LED Indicators
Figure 4 – LED Locations
PWR
Power.
Indicates unit is powered
ACTIVITY
Firmware Running
. Blinking means device firmware is running properly
LINK
UTP Link.
Solid on means Sender & Receiver are communicating
HDCP
Video Status.
Off = No Video, Blink = Video, Solid ON = Video + HDCP
Twisted Pair Cable Recommendations
Distance
Cable Type
Gauge
0
to
199
ft
Cat5e,
Cat6,
Augmented
Cat6
24,
23
UH-1BT
200 to
230
ft
Cat6,
Augmented Cat6
23
Distance
Cable Type
Gauge
0
to
299
ft
Cat5e,
Cat6,
Augmented
Cat6
24,
23
UH-1BTX
300 to
330
ft
Cat6,
Augmented Cat6
23
Note:
If
the
CATx
cable
is
ran
adjacent
to
or
near
interfering
electrical
sources
such
as
ballasts,
generators,
motors,
etc,
then
Shielded
Twisted
Pair
(STP)
would
be
preferred
instead
of
UTP
