6
Hall Research Technologies, Inc.
Note
There are a few restrictions you need to be aware of
when you are building your string. The Backspace key
is the only way to correct/delete characters in your
string. You can only Backspace from the end of the
string. The Windows “Paste” function has been
disabled. You may only insert a character at the end of
the string. The maximum length of the ON or OFF
string is 100 characters. A Wait will occupy 3 character
spaces in the string. Any ASCII character input from
the keyboard will increment the string length by 1. All
Hexadecimal bytes will increment the string length by
1 character with the exception of the Hexadecimal
byte x1B. This hexadecimal byte will occupy 2 bytes.
If you have configured the unit to “Constantly Resend
Strings” and have “WAIT” times in the string, the unit
will not see the input transition until the delay is
finished.
Uploading commands to the HR-1P
After you have loaded a
configuration file containing your
“ON” string and “OFF” string or you
have created your “ON” string and
“OFF” string you are now ready to
upload the “ON” and “OFF” strings
to the HR-1P. Connect the HR-1P to
the PC’s comm. port you selected
earlier via the supplied cable.
Connect the HR-1P to the PC’s comm. port you selected
earlier via the supplied programming cable. The supplied
programming cable is a 6’ cable that has a female DB-9
connector that connects to the PC and the other end is a
male mini-stereo connector that plugs into the HR-1P.
