FXT-460
10
© Copyright 2020 Hall Research, LLC.
EDID Handling
With no SINK attached to the FXT-460-R HDMI OUT connector, the EDID presented to
the SOURCE will be emulated from the current EDID stored in the system.
5.0 Troubleshooting
If you are experiencing problems getting the system to work properly, please use the
following troubleshooting suggestions.
Ensure that all connections to the device are solid. Loose connections are the
number one cause of issues.
Try resetting the system by unplugging both power supplies and the HDMI IN
connector, wait 5 seconds and plug everything back in.
o
The front panel LEDs cycle several times at power up; after ~15
seconds, audio and video should be passing through the device.
Try restoring factory defaults using the front panel VIDEO EDID button (hold for
7 seconds).
Cycle the EDID mode with the front panel VIDEO EDID button.
Contacting Hall Research
If you determine your system is malfunctioning, do not attempt to repair the unit yourself.
Instead, contact Hall Research Technical Support at 714-641-6607.
To return the unit to Hall Research you must first get a Return Authorization (RMA)
number.
Package the unit carefully, if returning. We recommend that you use the original
container.