Placing the Base of the Pole onto the Anchor
2.
Verify that a flat washer has been placed on top of each 3/4" nut, see
Figure 6.
CAUTION: The following step requires two or more individuals.
Use proper lifting techniques when raising or lowering heavy
components.
3.
Position one person at the top half of the pole and one at the bottom half of
the pole.
4.
With both people lifting at the same time, lift the base of the pole over the
top of the four corner posts, see Figure 9.
5.
With the base of the pole on top of the four corner posts, place a 3/4" flat
washer on top of each corner post, see Figure 9.
6.
Place a 3/4" lock washer on top of each flat washer, see Figure 9.
7.
Screw a 3/4" nut onto each corner post and tighten nuts using a 1-5/8"
wrench until base of pole is secure, see Figure 9.
1
2
3
4
5
4
2
HBA124
5
Figure 9. Fastening the Base to the Pole
1. Threaded Corner Posts (4)
4. 3/4" Flat Washer (8)
2. 3/4" Nut (8)
5. Base of Pole
3. 3/4" Lock Washer (4)
8.
Crank the top half of the pole to a comfortable working position.
9.
Attach the basket to the pole, see the following procedure.
HBA125
L-807 and L-806 Wind Cone Installation and Maintenance Manual
23
