background image

1

1. SAFETY WARNINGS

Thank you for purchasing our child seat. Please ensure you 

fully read and follow the instructions provided. Please retain 

instructions for future use. If you have any further questions 

please contact your local store.

• Before using, please read the instruction manual carefully. The product is a 

safety product and is only safe when used in accordance with the instruction 

manual.

• This car seat is compliant with ECE R129/03.
• Do not use a child seat if the vehicle seat is equipped with an active front air 

bag. This can be dangerous. This does not apply to side airbags.

• It is most important that the seat belt is correctly routed.
• Never make unauthorised modifications or changes to the product.
• Never use the child car seat if it has been in an accident, or if it has become 

badly worn.

• Do not leave your children in the seat unattended at any time.
• In hot weather the plastic and metal parts of the product may become hot.

You should cover the seat when not in use, especially when your car is parked 

in the sun.

• Ensure that all luggage and objects likely to cause injury in the event of an 

accident are properly secured.

• Never use the child car seat without the cover. Only covers approved by the 

manufacturer can be used.

• The child car seat must be secured when not in use.
• Store this child car seat in a safe place when it is not being used. Avoid placing 

heavy objects on it.

• Most accidents occur on short trips. Therefore, do not be tempted to avoid 

using the seat simply because you are not travelling very far.

• Keep the plastic bag away from your child as it could cause suffocation.
• Do not expose the child seat to any corrosive substances. Use a wet towel

to clean the plastic body of the child seat.

• Make sure the child car seat belt is adjusted to a suitable position and ensure 

the belt is not twisted.

• Please ensure the lap belt is worn low down across the pelvis.
• Do not use this product second hand as you may never know its history.
• The rigid items and plastic parts of a child restraint must be located and 

installed so that they are not liable, during everyday use of the vehicle, to 

become trapped by a movable seat or in a door of the vehicle.

• Ensure that the seat is not damaged by heavy luggage, movable seats or 

slamming the car door etc.

• This product is only suitable if the vehicle is fitted with 3-point retractor safety 

belts, approved to UN/ECE Regulation N0.16 or other equivalent standards.

Содержание Nyala R129





















Отзывы: