4
©2018 Half Off Ponds. All Rights Reserved
Safety Information
The company Half Off Ponds has built this unit according to the state of the art and valid safety
regulations. Despite the above, hazards for persons and assets can emanate from this unit if it is
used in an improper manner or not in accordance with its intended use, or if the safety instructions
are ignored.
For safety reasons, children and young persons under 16 years of age as well as persons who
cannot recognize possible danger or who are not familiar with these operating instructions,
are not permitted to use the unit. Keep children under supervision to ensure that they do not
play with the unit.
Hazards encountered by the combination of water and electricity
The combination of water and electricity can lead to death or severe injury from electrocution, if the
unit is incorrectly connected or misused.
Prior to reaching into the water, always switch off the mains voltage to all units used in the water.
Correct Electrical Installation
•
Electrical installations must meet the national regulations and may only be carried out by a
qualified electrician. For your own safety, please consult a qualified electrician.
•
A person is regarded as a qualified electrician, if, due to his/her vocational education,
knowledge and experience, he or she is capable of and authorized to judge and carry out the
work commissioned to him/her. Working as a qualified person also includes the recognition of
possible hazards and the adherence to the pertinent regional and national standards, rules and
regulations.
•
The unit may only be connected when the electrical data of the unit and the power supply
coincide. The unit data is to be found on the unit type plate or on the packaging, or in this
manual.
•
Ensure that the unit is fused for a rated fault current of max. 30 mA by means of a fault current
protection device.
•
Extension cables and power distributors (e.g. outlet strips) must be suitable for outdoor use.
•
Minimum safety distance between the unit and the water is 6 feet.
•
Ensure that the power connection cable cross section is not smaller than that of the rubber
sheath with the identification H05RN-F. Extension cables must meet DIN VDE 0620.
•
Protect the plug connections from moisture.
•
Only plug the unit into a correctly fitted socket.
