Haldex Modular Trailer System, Инструкция по установке и обслуживанию

Страница: 9 / 20

Haldex Modular Trailer System (HTMS) -
I-Beam Mounting (cont’d)
Haldex Modular Trailer System (HMTS)
with Brake Monitoring System (BMS)
Installation/Service Guide (L31293W)
PAGE 7
Step 7 Slide outer brackets together
around I-Beams.
Step 8
Insert 3/8” bolts, flat washers,
lock washers and nuts. Torque
(4) places 28-32 ft. lb.
Step 9 Center Haldex Modular Trailer
System (HMTS) between
I-Beams and torque (4) places
28-32 ft. lb.
Tighten these bolts last.
Step 10
Attach hoses to appropriate
brake chambers. Do Not Use
teflon tape on fittings. Use
liquid thread sealant sparingly
on all fittings. (Loctite PST565
or equivalent.)
I-Beam I-Beam
Center Between I-Beams
I-Beam I-Beam
Center Between I-Beams
Inner
Bracket
3/8” Lock
Nut
Inner
Bracket
3/8” Lock
Washer
3/8” Bolt
Tighten these
bolts first
Step 11
For plastic ports, hand tighten fittings then rotate 1 to 1 1/2 additional turns.
The maximum torque allowed is 210 in. lb.