ITCM Stability Module to the ITCM connecting cable should be
no longer than 98.43” (2.5 m) in length.
814 037 011
59” (.5 m)
814 037 011
59” (.5 m)
814 038 001
59” (.5 m)
STABILITY MODULE
INSTALLATION/SERVICE
GUIDE (L31288W)
TM
DIAG+ Software
The ITCM Stability Module can be programmed using
DIAG+ Software Version 6 or later. Refer to DIAG+ Software
Installation/Service Manual L31287W.
Available for download at haldex.com
Connecting ITCM Stability Module to DIAG+
Software and Infocenter Simultaneously
A Y-splitter and extension cables are required when
connecting the ITCM Stability Module to the DIAG+
Software and Infocenter simultaneously.
Stability Module Programming
and Diagnostics
Note: Some cabling details have
been omitted for clarity.
Page 24