HALDER EH 22350, Руководство по эксплуатации

Страница: 11 / 53

1 Introduction
1.2 Warranty and liability
11
1.2 Warranty and liability
The obligations agreed in the supply contract, the general terms and conditions as well as
the terms of delivery of the lifting pins and the legal regulations valid at the time of the
conclusion of the contract apply.
All information and notices in these original operating instructions have been compiled
taking into account the applicable standards and regulations, the state of the art and our
many years of knowledge and experience.
These original operating instructions are not intended to be, and should not be used as a
substitute means of determining the suitability or reliability of the lifting pin for any
particular user application. It is the duty of the manufacturer or distributor to carry out an
adequate and complete risk assessment, and evaluation and testing of the lifting pin with
regard to the respective specific application or use in question.
Warranty and liability claims for personal injury and damage to property are excluded if
they are attributable to one or more of the following causes:
– improper or inappropriate use of the lifting pin,
– improper assembly, commissioning, operation, servicing and cleaning of the lifting pin,
– operation of the lifting pin with defective components or improperly installed or non-
functional components,
– a failure to observe the original operating instructions and the notices in the original
operating instructions regarding assembly, commissioning, operation, servicing and
cleaning of the lifting pin,
– use of unqualified or untrained personnel,
–
structural changes to the lifting pin (Conversions or other changes to the lifting
accessory may not be made without the prior written consent of Erwin Halder KG. In
case of infringement, the lifting pins lose their EC conformity),
– improperly performed repairs,
– use of non-approved spare parts or use of spare parts that do not meet the technically
specified requirements,
– disasters, effects of foreign bodies, and force majeure.
Furthermore, Erwin Halder KG reserves the right to revise this publication at any time if
technical changes are made in the course of improvements to usage properties and
further development, without obligation to notify any person of the revisions.