40
General
This page indicates the model and serial
number of the device highlighted on the
HRAS
Registration
window, and shows the mode
and status (on or off) of each of the channels.
In the bottom section the amplifier channel
numbers or PS (power supply) are shown in
red if there is a fault in the respective channel
or power supply.
o
Click a button in this section to view more
information of the condition of the
channel or power supply unit.
Configuration
This page can be used to turn individual
amplifier channels on or off. The default is for
all channels to be turned on. To turn one or
more channels off:
o
Click the Off button for the channel(s) you
want to turn off.
The Apply button becomes active when you
make a change.
o
Click Apply to apply the change to the
device.
o
Click Close to close and return to the
HRAS Registration
page.
Clicking Close without clicking Apply first
will lose the changes
.
