HAKO Sweepmaster P900 R, Руководство по эксплуатации

Страница: 43 / 64

43
Maintenance and servicing
5.2 General Sweepmaster
information
5.2.1 Dismantling and installing the
sweeping roller
The sweeping roller can be accessed
from the left-hand side and is removed
as follows:
- Lower the sweeping roller.
- Remove the ignition key and secure
the machine with the parking brake.
- Remove the cover.
Fig. 13 Removing the cover
- Open the locks (Fig. 13/2) with the
square key provided in the acces-
sories kit (turn anticlockwise).
- Remove the cover (Fig. 13/1).
Fig. 14 Removing the
sweeping roller
- Loosen and remove the star knob
(Fig. 14/2).
- Remove the sweeping roller holder
(Fig. 14/1).
- Turn the lever (Fig. 14/3 + 5) upwards
to unlock.
- Remove the plate with the sealing
strip (Fig. 14/4).
- Pull out the sweeping roller.
Assemble the sweeping roller in
reverse order.
5.2.2 Adjusting the sweeping level
An adjustment device allows adaptation
to the respective sweeping conditions.
The sweeping roller should be set as
described below for normal use and
with regard to low wear.
The sweeping level must be checked
every 125 operating hours and is car-
ried out as follows on smooth and level
ground:
2
1
1
2
3
4
5