HAKO Sweepmaster P1500 RH, Инструкция по эксплуатации

Страница: 32 / 80

32
Operation
Control lamp for coolant tempera-
ture (Fig. 11/7)
It lights up as soon as the coolant has
become too warm. Switch the engine
off immediately and locate the cause.
Button to raise sweepings container
(Fig. 11/8)
It serves to raise the sweepings con-
tainer. To raise the container, press the
button until the it is at the required
height. The control lamp in the button
lights up. If the button to raise the con-
tainer is pressed during sweeping oper-
ation, the sweeping function is
deactivated.
Button to pivot the sweepings
container for emptying (Fig. 11/9)
It serves to pivot the sweepings con-
tainer to a vertical position for emptying.
The control lamp in the button lights up.
The sweeping container can only be
tipped when the container has been
raised beyond a minimum height.
Button to pivot the sweepings con-
tainer back (Fig. 11/10)
It serves to pivot the sweepings con-
tainer horizontal because it can only be
lowered when in a horizontal position.
The control lamp in the button lights up.
Button to lower the sweepings
container (Fig. 11/11)
It serves to lower the sweepings con-
tainer. To lower the container, press the
button as long as necessary until it is
against the frame. The control lamp in
the button lights up. The sweepings
container pivots in automatically, if nec-
essary.
Button for filter agitation system
(Fig. 11/12)
On actuating the switch, the agitating
device is switched on and the filter sys-
tem cleaned. The agitation process
takes approx. 15 second. The control
lamp in the button lights up. During the
agitation process, the suction turbine is
automatically deactivated. If the control
lamp in the button starts to flash (single
acoustic warning), the filter is extremely
soiled and must be agitated clean.