Armadillo 6X and AM7D-III PB# 4100043UM Rev. B 07/20
PowerBoss®, Copyright 2014
Page 31
PowerBoss
®
The Power of Clean
TRAVELING
Move the machine forward or backward as follows:
• Forward: Apply pressure to the front of the
directional control pedal, increasing pressure to
increase speed.
• Reverse: Apply pressure to the rear of the
pedal, increasing pressure to increase speed.
SLOWING AND STOPPING
Allow the directional control pedal to move into
neutral. The machine will slow and coast to a stop.
OPERATING ON GRADES
1. Always travel slowly.
2. Exercise extreme caution when traveling across
or turning on grades.
SWEEPING
1. Turn the impeller switch on.
2. Turn on the main and side broom switches on.
3. Drive the machine over the area to be swept.
EMPTY HOPPER WITH HIGH DUMP FEATURE
1. Drive the machine to the dumping area.
2. Use the directional control pedal to position the
machine so that the space between the machine
and the container or dumpster is adequate to
raise the hopper.
3. Reduce the engine speed.
4. Pull back the raise/lower lever to the RAISE
position and hold until the bottom of the hopper is
high enough to clear the top of the container.
WARNING
Never place your hands or other body parts
near the lift arms when the hopper is operating.
5. Use the directional control pedal to slowly and
carefully move the machine forward until the
hopper is properly positioned to dump the debris
into the container.
