manualshive.com logo in svg

HAKO Hamster 800 V, Руководство по эксплуатации

Поделиться
Скачать
HAKO Hamster 800 V Скачать руководство пользователя страница 18

18

Starting Up

2.1.6

Instruction

Operators must receive instruction 
before putting the machine into service. 
Only technicians from your local, 
authorized Hako dealer are allowed to 
provide initial instruction on how to use 
the machine. The manufacturing plant 
notifies the dealer immediately after 
delivering the machine and the dealer 
will contact you to arrange a date for 
providing the initial instruction.

2.2

Before starting up each day

Carry out the following checks before 
starting the machine:

1. Check the parking space for signs of 

leaks.

2. Only Hako Hamster 800 V: Check 

the engine oil level with the dipstick 
and refill, if necessary; refer to 
Section 5.4.2.

3. Only Hako Hamster 800 V: Check 

the fuel supply and refill fuel, if 
necessary, refer to refer to 
paragraph 2.1.2.

4. Only Hako Hamster 800 E: Check 

the charge status of the batteries 
and recharge, if necessary. 

5. Check the fill level of the dirt hoppers 

and empty them, if necessary.

6. Check the levels of wear on the 

rotary brush and side brush.

7. Check the ergonomic position of the 

handlebar and readjust it, if 
necessary.

Содержание Hamster 800 V































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды