HAKO Citymaster 650 Скачать руководство пользователя страница 181

Страница: 181 / 190

06-147015-00-00.fm

181

Attachments and Options

Setting the fixed engine speed

The fixed engine speed is set with the switch

Fig. 198-64

. Set the speed

according to the requirements.

Starting snow clearing

The accelerator pedal

Fig. 199-36

is used for continuously changing the

speed for driving forwards.
The accelerator pedal

Fig. 199-37

is used for continuously changing the

speed for reversing.
Push the accelerator pedal down slowly until the vehicle starts, the speed

is increased further by pressing on the pedal.
Slowing down or braking the vehicle: Slowly reduce the pressure on the

accelerator pedal, the vehicle slows down or stops.
The vehicle speed in the:

•

transport mode is 0 to 25 km/h,

•

work mode 15/20/25 km/h according to selected engine speed.

Fig. 198:

Stage

rpm

Use

1 – ECO

1900

At low load

2 – Standard 2250

For medium load

3 – Maximum 2630

For high load

Fig. 199:

Attention

Before you leave the vehicle, the attachment must be lowered

to the ground!

Содержание Citymaster 650































































































































































































Результаты поиска

Содержание Citymaster 650

Отзывы:

HAKO Citymaster 650, Руководство по эксплуатации, Страница: 181 / 190

Результаты поиска

Содержание Citymaster 650

Отзывы: