HAKO Citymaster 650 страница 105 Скачать руководство пользователя

Страница: 105 / 190

05-147015-00-00.fm

105

Maintenance and Servicing

5.5 Cooling system

5.5.1

Cleaning the cooling system

Check the grille sieve and the combination radiator located behind it daily

and clean as required.
1. Place the vehicle on a level surface and hold it with the parking brake.

Switch the engine off and pull out the ignition key. Let the engine cool

down.

2. Open the grille sieve

Fig. 100-A

with the catch

Fig. 100-B

3. Check the grille sieve and the combination radiator located behind it for

contamination and clean as required with compressed air or water jet.

Danger

•

Danger of burns from hot parts! Do not touch any parts such as engine block, cooling system and

exhaust system during operation and for some time after. Let the engine cool down.

•

Risk of scalding from hot coolant! The cooling system is under pressure. If the cooling system cap

is opened with a hot engine there is a risk of scalding. Let the engine cool down.

•

Risk of injury due to rotating parts! Injury of limbs or hair or clothing getting caught up. Switch the

engine off and pull out the ignition key.

Attention

•

The cooling fins are very thin and can be damaged easily!

•

Small air bubbles can form when the radiator is filled. Therefore the cooling system must be

vented at the same time. Have this done by an authorised workshop!

Environmental danger

•

Ensure safe and environment-conserving disposal of operating and auxiliary materials.

Take up escaping or spilled operating materials in suitable containers and dispose of them in an

environmentally friendly manner.

Fig. 100:

Содержание Citymaster 650































































































































































































Результаты поиска

Содержание Citymaster 650

Отзывы:

Похожие инструкции для Citymaster 650

Бренды по названию

Популярные бренды

HAKO Citymaster 650, Руководство по эксплуатации

Результаты поиска

Содержание Citymaster 650

Отзывы:

Похожие инструкции для Citymaster 650

Бренды по названию

Популярные бренды