HAKO Citymaster 650 Скачать руководство пользователя страница 102

Страница: 102 / 190

102

05-147015-00-00.fm

Maintenance and Servicing

5.2 Panelling and covers

5.2.1

Removing the engine cover

Open the lock

Fig. 97-A

with a square key and pull the engine cover

Fig. 97-B

out in travel direction and upwards.

5.2.2

Opening the side panelling on the left and right

Side panelling on the left: Loosen the four fastening bolts

Fig. 97-C

and

remove the side panelling

Fig. 97-D

Side panelling on the right: Open the two top lock fasteners

Fig. 97-E

raise the catch

Fig. 97-F

and swivel open the service door

Fig. 97-G

. To

remove, release the safety cable

Fig. 97-H

and unhook it from the hinges.

5.2.3

Removing radiator cover

Pull the lever

Fig. 97-I

to the front and remove the radiator cover

Fig. 97-J

to the side and front.

Danger

•

Risk of injury! Put the attachment into service only if all protective devices are attached and in

protection position.

•

Danger of burns from hot parts! Do not touch any parts such as engine block, cooling system and

exhaust system during operation and for some time after. Let the engine cool down.

Fig. 97:

Содержание Citymaster 650































































































































































































Результаты поиска

Содержание Citymaster 650

Отзывы:

HAKO Citymaster 650, Руководство по эксплуатации, Страница: 102 / 190

Результаты поиска

Содержание Citymaster 650

Отзывы: