manualshive.com logo in svg

HAKO Citymaster 2200, Руководство по эксплуатации, Страница: 145 / 238

Поделиться
Скачать
HAKO Citymaster 2200 Скачать руководство пользователя страница 145

03-1481-00-00.fm 

145

Operation

Adjusting the sweeping unit

Sweeping unit with 2-brush system

With a sweeping unit with 2-brush system (option), the following functions 

are set using the joysticks

Fig. 114-112, 113 

and

 114 

Joystick

Fig. 114-113:

•

Joystick

 

forwards: The left-hand brush is lowered (floating position)

•

Joystick

 

backwards: The left-hand brush is raised

•

Joystick

 

to the left: The left-hand brush swings to the left

•

Joystick

 

to the right: The left-hand actuator swings to the right

Joystick

Fig. 114-114:

•

Joystick

 

forwards: The right-hand brush is lowered (floating position)

•

Joystick

 

backwards: The right-hand brush is raised

•

Joystick

 

to the left: The right-hand brush swings to the left

•

Joystick

 

to the right: The right-hand actuator swings to the right

Sweeping unit with 3-brush system

With a sweeping unit with 3-brush system (option), the following functions 

are set using the joysticks

Fig. 115-112, 113 

and

 114 

Joystick

Fig. 115-112:

•

Joystick

 

forwards: The 3rd brush is tilted forwards

•

Joystick

 

backwards: The 3rd brush is tilted backwards

•

Joystick

 

to the left: The 3rd brush is tilted to the left

•

Joystick

 

to the right: The 3rd brush is tilted to the right

Joystick

Fig. 115-113:

•

Joystick

 

forwards: The 3rd brush is lowered

•

Joystick

 

backwards: The 3rd brush is raised

•

Joystick

 

to the left: The 3rd brush swivels to the left

•

Joystick

 

to the right: The 3rd brush swivels to the right

Joystick

Fig. 115-114:

•

Joystick

 

forwards: The pulled brushes are lowered (floating position)

•

Joystick

 

forwards: The pulled brushes are raised

•

Move the joystick to the left: The pulled brushes swing in

•

Move the joystick to the right: The pulled brushes swing out

Swivelling the 3rd brush / Reversing the direction of rotation

In order to change the 3rd brush to a different side with a 3-brush system, 

actuate the switch

Fig. 115-103

.

The 3rd brush is swivelled and the direction of rotation reversed.

Fig. 114:

112

113

114

Note

With a 2-brush system, the joystick 

Fig. 114-112

 is only used 

in conjunction with a weed brush (option). Set the angle of the 

weed brush with the joystick.

Fig. 115:

112

113

114

Fig. 116:

103

Содержание Citymaster 2200















































































































































































































































Отзывы:

Нет отзывов