Hako GmbH - Head Office - Hamburger Str. 209-239 - 23843 Bad Oldesloe, Germany
Tel. +49 4531 806-0 - Fax +49 4531 806-338
4. Switching vacuum sweeping on
Page 141
Press the Hako button
76
. All set sweeping functions
are switched on.
Work mode information symbol
A
lights up.
6. Starting vacuum sweeping
Page 142
Slowly press down the accelerator pedal
38
.
Vehicle speed depending on the engine fixed speed:
ECO = 16 km/h, standard = 20 km/h, maximum = 27 km/h
8. Changing the sweeping width
Page 143
Press the joystick
74
: The left-hand rotating brush
swivels.
Press the joystick
75
: The right-hand rotating brush
swivels.
9. Sweeping dry/wet surfaces
Page 142
Circulating water is supplied to bind dust.
If necessary, switch on the fresh water pump.
Use the lever
B
to adjust the fresh water quantity.
5. Selecting the engine fixed speed
Page 142
Tip switch
67
stage 1: ECO – sweeping on the level.
Stage 2: Standard – sweeping on a medium slope.
Stage 3: Maximum – sweeping on a steep slope.
7. Sweeping larger objects
Page 143
Press the pedal
48
: The coarse material flap opens.
Move the pedal to the right: Pedal engages.
Move the pedal to the left: Pedal disengages.
10. Operating the multifunction display
Page 34
The turn-push knob
73
is used to select menus and
submenus and to set values.
Settings during vacuum sweeping:
Setting the rotating brush speed
C
Page 152
Switching the fresh water pump on
D
Page 153
Switching the suction fan on
E
Page 153
76
67
73
74
75
A
38
48
B
C
D
E
