HAKO Citymaster 1600, Руководство по эксплуатации

Страница: 155 / 222

06-1491-00-12.fm 155
Attachments and Options
Checking the suction mouth sealing strips
Check the sealing strips
Fig. 151-A
of the suction mouth daily. Immedi-
ately replace defective seals, also on the coarse material flap, since the
suction power is reduced.
The gap
Fig. 151-B1
between the side sealing strip and ground must be
approx. 5 mm.
The gap
Fig. 151-B2
between the rear sealing strip and ground must be
approx. 10-15 mm.
In the case of wear of the sealing strips, fasten the rollers
Fig. 151-C
in
the next higher hole
Fig. 151-D
.
Make sure that the gap size is maintained!
Make sure that the rollers are again fastened in the lower hole after the
sealing strips have been changed!
Fig. 151:
A
C
D
B1
B2