HAKO 147015, Руководство по эксплуатации

Страница: 74 / 190

74
02-147015-00-00.fm
Use
Securing the front tools
1. Bring the locking hook into the front position and the lever into the lower
position (I) .
2. The movement limiter of the front tool carrier is determined by the
chain Fig. 65-C and the hooking point of the chain.
• For vacuum sweeping, hook the chain in the holder Fig. 65-D with the
first link.
• For attachments with floating position the chain must be hooked onto
the hook
Fig. 65-E !
3. Check the locking plate Fig. 65-F on the attachment. If necessary,
loosen the screws and shift the locking plate.
The following is shown in the multifunction display: Driver not on driver's
seat Fig. 64-X1 ; upper end position of the front tool carrier Fig. 64-X2 ;
floating position of the front tool carrier Fig. 64-X3 ; front tool carrier low-
ered and fixed Fig. 64-X4 .
Fig. 64:
X2
X4 X3
X1
Fig. 65:
A B II I
B
12 C
E C
D
F