Haklift Oy
Asessorinkatu 3-7
20780 Kaarina, Finland
Tel. +358 2 511 5511
www.haklift.com
Lifting Solutions Group
Axel Johnson International
3. Use
1. Open the wire clamps so that the wire rope
won’t bend or twist.
2. Push the lever that is on top of the wire rope hoist in a forward position until you hear the jaws open.
3. Push the wire rope through the wire rope hoist so you can see it from the other side. Pull as much rope as
you need and then lock the wire rope by pushing the release handle to a backwards position.
4. Place the lever handle extension either in the front or back peg depending if you want to lift or lower the
load. Now the wire rope hoist is ready for use.
5. Take the anchor pin out and put the hook, shackle, wire slings or some other tool which you will attach to
the wire rope hoist. Attention! Check the strength of the attachment point before starting to lift or pull.
6. Moving the lifting lever back and forth will make the wire move through the wire rope hoist and tighten.
Moving one of the levers you can make the wire move in or out.
7. When finishing the use of the wire rope hoist pull the wire out by pushing the release lever on top of the wire
rope hoist into a frontward position so that the wire rope get released. Clean the wire rope before releasing it
through the wire rope hoist so that no dirt will get into the wire rope hoist. Push the lever always back to the
backwards position so that the spring relaxes.
4. Wire rope hoist achoring
•
When attaching the wire rope hoist make sure that the person who is using the wire rope hoist
won’t be
put into dangerous situations from the load or attaching the wire rope hoist.
•
Mount the wire rope hoist in between the anchoring point and the load so that the wire rope hoist is set in
the same direction as the wire and so the wire moves straight through in the direction of the pulling
direction.
•
In an indirect pull use only working and strong enough wire rope hoists.
•
Using lifting slings or lifting tools, make sure that they have at least the same loading capacity as the wire
rope hoist that is being used.
•
Make sure that the anchor pin is fully locked in place with a spring pin.
Release handle
Lowering lever
Lifting lever
Wire
’
s insert
direction
