Hakko Electronics MONITOUCH V606e, Технические характеристики

Страница: 56 / 77

6-8 2. Main Menu Screen
1-2. SYSTEM & Function Switch Test
Check operations of six switches provided vertically on the right side of the V606e panel.
Press the switch, and check that the lamp on the screen lights up while the switch is held down.
1-3. Touch Switch Test
If a touch switch does not activate at all or if an operation is performed without pressing any touch
switch, check that the touch switches on the V606e panel are working properly.
1. Press the [Switch Check] switch. Grids appear on the screen as shown below.
2. Press a position on the panel, and check that the pressed position turns white.
The switch is activated normally when the pressed position turns white.
To move back to the “I/O Test” screen, press the [F4] switch.
To delete white dots, press the [F5] switch.
3. If a position different from the pressed position turns white, refer to “Touch Switch Adjustment” on
the next page and adjust the touch switch position.
SYS
F-1
F-2
F-3
F-4
F-5
SYS
F-1
F-2
F-3
F-4
F-5
SYSTEM
F2
F3
F4
F5
F1
POWER
X: Y:
Erase
Return
SYSTEM
F2
F3
F4
F5
F1
POWER
X: 180 Y: 206
Erase
Return