Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 412 / 746

Chapter 13 Macro
13-29
13
Mac
ro Co
mma
nds
•
CHG_LNG
This is the macro command that selects the display language. For more
information, refer to “Chapter 29 Language Selection.”
•
GET_STATUS_FL
This command is used to obtain the FL-net information. For more
information, refer to the Specifications for Communication Unit FL-Net
separately provided.
•
SET_DSW
This command determines whether or not to use the deadman switch of
V608CH. For more information, refer to the V608CH Specifications Manual
separately provided.
•
OUT_ENQ
Available Devices
(OUT_ENQ)F1
Interrupt for Serial Port
Example: When the character display ($u200) is “ABCD”:
The data is sent to the host.
Network Selection for A Link + Net10 Communication
This macro command should not be used in anything except OPEN macro of
screen setting. If it is used, the network will change as soon as it is executed
and a communication error will occur.
Internal
Memory
PLC
Memory
Constant
Memory
Card
Indirect W Word
F0 Command
name
F1
F1 + 0 ENQ No (10H to 2FH)
F1 + 1 Transfer data format 0: Numerical data 1: Characters
F1 + 2 The number data to be transferred F1 + 1 = 1: Bytes
F1 + 1 = 0: Words
F1 + 3 Top address number
F1 + 4 0: Non-wait Next macro execution
1: Wait Next macro execution on completion of transmission
F1 + 1 = 0 (numerical data) F1 + 1 = 1 (characters)
F1 + 0 $u00100 = 0010H $u00100 = 0010H
F1 + 1 $u00101 = 0 $u00101 = 1
F1 + 2 $u00102 = 2 $u00102 = 4
F1 + 3 $u00103 = 200 $u00103 = 200
F1 + 4 $u00104 = 0 $u00104 = 0
SYS(OUT_ENQ) $u00100 SYS(OUT_ENQ) $u00100
↓ ↓
Data received
at the host
3431343234333434H 41424344H
F1 + 0 Always ON
F1 + 1 Network selection: 2
F1 + 2 System code
F1 + 3 Network number