©1997, AMERICAN HAKKO PRODUCTS, INC.
ALL RIGHTS RESERVED
8
APPLICATIONS.
SOLDERING STATION FUME EXTRACTION.
The Hakko HJ3100 is specially engineered to remove particulate and gaseous contaminants from soldering work stations.
As many as four stations may be serviced by one HJ3100, depending upon the accessories selected. The HJ3100 is a
high-mass flow, low-vacuum system, which means that it uses air flow across the work area for effective fume
extraction. The user may choose from the following options, or mix them at need:
Bench hoods (‘plenums’) for work on printed circuit boards. Both large and small hoods are available.
Supported or free-standing hoods and nozzles for solder pots or small flow systems. These devices may be mounted on
either stiff or flexible ducting. Several types of support hardware and ducting are offered.
Articulated arms for work where flexibility is desired.
Refer to the section on ‘Setup’ for some typical layouts. Appendix A contains descriptions of the accessories available
for different applications.
PARTICULATE EXTRACTION FROM MACHINING OPERATIONS.
The Hakko HJ3100, in conjunction with the 999-178 filter, can be used to remove fine particles and dust from machining
and grinding operations, provided that these particles and dust do not contain, or are not coated by, flammable or
corrosive materials. The pre-filter must be checked more frequently when the HJ3100 is so used with a standard
HEPA/carbon filter.
