Display
MODE
DSP
SHOW PROFILE
SHOW TIP LOADS
SHOW TIP TIME
SELECT PROFILE
TIP TYPE
MANUAL SET*
HAKKO FX-100 has 3 operation buttons. The operation executed
by each button varies depending on what is on the display screen.
The operation for each button is indicated at the bottom of the
screen. Select the button according to the indication.
By pressing certain buttons from the home screen, the display will
change, revealing the button labels and waiting for your selection.
Left button MODE
Center button DSP (Display)
Right button SET (Parameters)
If no button is pressed, it will go back to the home screen.
5. OPERATION
Controls and displays
左ボタン
右ボタン
中央ボタン
●
Operation
1. Turn ON the power switch.
2. The screen will switch in order of product number indication
→
greeting
→
home screen.
3. When the home screen is displayed, the MODE status is indicated on the left and output graph at the
center. The graph starts rising as the iron tip temperature increases. The graph starts falling as the iron
tip approaches stable temperature, reaching the minimum when the stable temperature is achieved. Start
soldering after the stable temperature is reached.
Example) MODE screen
▲
ＮＯＲＭＡＬ
ＢＯＯＳＴ
＜ＣＡＮＣＥＬ＞
＜↑＞ ＜↓＞ ＜ＯＫ＞
Operate the machine using these buttons
that are placed in the order of the buttons
displayed on the screen.
・
When MODE is pressed
The mode can be changed to NORMAL mode or BOOST mode.
By changing the mode to BOOST, the performance of the station is increased and the tip temperature rises
slightly.
▲
ＮＯＲＭＡＬ
ＢＯＯＳＴ
＜ＣＡＮＣＥＬ＞
＜↑＞ ＜↓＞ ＜ＯＫ＞
B
Ｎ
Move the cursor by pressing the <↑> or <↓>
button to select NORMAL or BOOST.
After selecting, press <OK>.
Display in the NORMAL mode
Display in the BOOST mode
△△△△
Ｎ
ＭＯＤＥ ・ ＤＳＰ ・ ＳＥＴ
Display item
NORMAL / BOOST
SHOW PROFILE / SHOW TIP LOADS / SHOW TIP TIME / SELECT PROFILE / TIP TYPE
Display in the set profile
Display in the soldering count
Display in the cumulative running time on the iron tip
No.1 / No.2
AUTO DETECT / MANUAL SET / OFF
<01> / <02> / <03>
Initial value
NORMAL
ー
0
0
No.1
OFF
ー
Display item and initial value of MODE / DSP screen are as follows.
* Displayed only when MANUAL SET is selected.
