HAKKO FA-431 Fume extraction system
Power cord
Cap (inside main unit)
Remote control
2. SPECIFICATIONS
4. OPERATION
●
HAKKO FA-431
Instruction Manual
Main filter (inside main unit)
Pre-filter
Instruction manual
1
10pcs.
1
FUME EXTRACTION
Thank you for purchasing the HAKKO FA-431 Fume Extraction system.
Please read this manual before operating the HAKKO FA-431.
Keep this manual readily accessible for reference.
2015.12
MA02798XZ151201
To prevent accidents or damage to the HAKKO FA-431, be sure to observe the followings:
●
Use only genuine HAKKO replacement parts.
●
Do not operate the fume extraction without the filter; otherwise it may cause the unit to malfunction.
●
Hold the plug when inserting or removing the cord in/from the outlet.
●
Do not allow the HAKKO FA-431 to become wet, or use it with wet hands.
●
While using the HAKKO FA-431, don’t do anything which may cause bodily harm or physical damage.
1. PACKING LIST AND PART NAMES
Please check to make sure that all items
listed below are included in the package.
1
1
1
1
100 - 110V 120W 220 - 240V 110W
High
Medium
Low
4.7m³/min 3.7m³/min 2.8m³/min
97
％
(
≧
0.3μm)
ø55 mm
330(W) x 366(H) x 343(D) mm
7.2 kg
Power Consumption
Suction Capacity *1
Filtering Efficiency
Duct diameter
Dimensions
Weight (w/o cord)
OVERSEAS AFFILIATES
U.S.A.: AMERICAN HAKKO PRODUCTS, INC.
TEL: (661) 294-0090 FAX: (661) 294-0096
Toll Free (800)88-HAKKO
4 2 5 5 6
http://www.hakkousa.com
HONG KONG: HAKKO DEVELOPMENT CO., LTD.
TEL: 2811-5588 FAX: 2590-0217
http://www.hakko.com.hk
E-mail:[email protected]
SINGAPORE: HAKKO PRODUCTS PTE., LTD.
TEL: 6748-2277 FAX: 6744-0033
http://www.hakko.com.sg
E-mail:[email protected]
Please access to the following address for the other Sales affiliates.
http://www.hakko.com
HEAD OFFICE
4-5, Shiokusa 2-chome, Naniwa-ku, Osaka 556-0024 JAPAN
TEL:+81-6-6561-3225 FAX:+81-6-6561-8466
http://www.hakko.com E-mail:[email protected]
© 2016 HAKKO Corporation. All Rights Reserved.
*1 When using 2 ducts
* Specifications and design are subject to
change without notice.
This product includes such features as electrically conductive plastic parts and grounding of the unit
as measures to protect the device to be soldered from the effects of static electricity. Be sure to observe
the following instructions:
1. The plastic parts are not insulators, they are conductors. When making repairs or replacing
parts, take sufficient care not to expose live electrical parts or damage insulation materials.
2. Be sure to ground the unit during use.
3.WARNINGS, CAUTIONS, NOTES AND EXAMPLES
●
Do not absorb combustible, explosive or corrosive gas.
●
Store the fume extraction unit in a dry place.
●
Do not block the exhaust vent of the fume extraction unit.
●
Turn the power off when not in use, or left unattended.
●
Turn the power off when changing parts or storing the
HAKKO FA-431.
●
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of
the appliance in safe way and understand the hazards involved.
●
Children shall not play with the appliance.
●
Cleaning and user maintenance shall not be made by
children without supervision.
WARNING
CAUTION
4. OPERATION
1. Open the upper cover and then remove the
plastic bag from the main filter.
2. Put the main filter on the main unit. Set the
filter with the arrow pointing down
(as shown in the illustration).
3. Fit the pre-filter on top of the main filter.
Be sure the pre-filter lies flat and completely
covers the top of the main filter with no gaps.
●
Set the filter
4. Close the upper cover
HAKKO FA-431
Fume extraction
system
Cap
Main filter
Pre-filter
Remote
control
Power cord
Pre-filter
Main filter
(facing the arrow
downward)
Duct set (Duct / Adapter / Rectangular nozzle or Round nozzle / Net)
●
Duct set (not included)
or
Round nozzle
Net
Duct
(ø55 mm)
Adapter
Rectangular
nozzle
1. Connect the power cord to the power receptacle on the right of the unit.
2. Plug the power cord into a ground wall socket.
3. Turn the power switch on. Power lamp will light up.
CAUTION
・
Close the cover before turning the power switch on.
・
Do not block the open port on purpose.
・
When the fan is running, do not open the upper cover.
・T
urn the power off when not in use. Failure to do so may result in shorter filter life.
・
The main filter on the HAKKO FA-431 should be changed once per year as a general rule.
Continued use after the replacement period may result in malfunction.
CAUTION
Remove protective film before use.
CAUTION
Remote control operation does not switch off
the power of the HAKKO FA-431. (Only the fan
is stopped.) After work has been completed,
set the power of the HAKKO FA-431 main unit
to OFF.
※Fan of HAKKO FA-431 will operate in remote control.
(refer to the “
●
Operation of the remote control”)
Power lamp
(Green)
Flow selection
switch
Low
High
Medium
Channel
set mode
Remote control
receiver
Exhaust vent
Inlet
※Adjust the flow suitable for working environment by using flow selection switch.
●
Attach the duct
A. How to attach duct set
1. Refer to Figure 1(right), and attach the
nozzle and adapter to the duct.
Insert the nozzle and adapter until it stops,
turn the nozzle clockwise. Make sure the
nozzle and adapter are firmly attached.
Twist the nozzle tight enough to avoid
coming off.
(Fig.1)
1 Insert the nozzle
until it stops.
Turn the nozzle clockwise.
2
Be sure the duct is
facing in the
proper direction
during assembly.
or
2. Fit the net on the nozzle. (Figure.2)
3. Insert the duct into the open port.
If using one duct, ensure the cap is in place
on the unused port.
When using two ducts, please store the cap
inside the main unit next to the main filter as
shown in Figure 3 (right).
(Fig.3)
(Fig.2)
Cap
●
Fume extraction unit
Power switch
風扇組合
插頭
