28
English
AUX Operation
1.
Ensure that the unit is connected to the TV or audio device.
2. While in ON mode, press the
/SOURCE
button repeatedly on the unit to switch
between
AUX
mode.
3. Operate your audio device directly for playback features.
4. Press the
VOL +/–
button to adjust the volume to your desired level.
Adjust the volume
• Press the
VOL +/–
button on the unit to adjust the volume.
• While adjusting the volume, the status indicator flashes quickly.
• While the volume level reaches its maximum level, if you press the
VOL+
button again, the
status indicator flashes once. While the volume level reaches its minimum level, if you press
the
VOL–
button again, the status indicator flashes once.
Adjust the BASS / TREBLE
Rotate the
BASS
knob on the unit to adjust bass level, the status indicator flashes quickly.
Rotate the
TREBLE
knob on the unit to adjust treble level, the status indicator flashes quickly.
Automatic Noise Reduction
Like in all other amplifiers there is a slightly hearable murmur in HAISER Sound System if the
volume is set very high. To prevent the user from hearing it during breaks in speech or music, the
amplifier is automatically reduced within a few seconds if the source signal gets under 3 mV. As
soon there is another source signal, the amplifier will be increased again within 300 ms. For cer-
tain uses it might however be necessary to temporarily disable the Automatic Noise Reduction:
Disable Automatic Noise Reduction:
• Hold
VOL–
in Standby Mode until the red Standby LED
slowly
flashes
one time
.
Enable Automatic Noise Reduction:
• Hold
VOL–
in Standby Mode until the red Standby LED
rapidly
flashes
three times
.
