a. As shown in step
①②③
, after pressing “ ” “ ”
“ ”, the “ ”icon will flash on the screen, which
means entering the setting mode.
Function setting guide
b. After entering the setting mode. Press the same button
according to the icon displayed on the right side of
the screen, as shown in the picture. When the icon
“ ”on the screen flashes, you can press the “ / ”
two buttons to adjust the parameters. The remaining
four functions “ ” settings are the same
operation. Click the same b u t t o n ( t h e i c o n o n t h e
screen will flash), then press the “ / ” button to
adjust the parameters.
Tips:
Detection range: 25%-100%
Hold time: 5s-30min
Stand-by dimming: 10%-50%
Stand-by period: 0s-30min
Daylight sensor: 0-120lux
(Note: All the following operations must be completed
within 30 seconds, otherwise the setting will fail.)
s
s
s
s
1
2
3
s
s
C. After the function setting is completed, press “ ”
button and the “ ” icon will appear on the screen,
then
press
“ ” button to complete the setting.
M
M
S