Hainbuch ms dock, Руководство по эксплуатации

Страница: 35 / 72

ms dock
Installation
Order h49 7144.907-333 35
7.5 Installation of the product
A Product
A1 Fixing screws on the product
B
Clamping bracket
a Test surface, product face run-out
b Test surface, position product
INFORMATION
The fixing threads for the clamping device can be used
as transport threads.
1. As described in the »Preparation of the machine for in-
stallation« chapter, prepare for the following steps.
7.5.1 Compatibility check
Check the compatibility of the product and the connection
point of the machine.
For this, check that the connection point and the product
share the same adaptation geometry. Also check if the actu-
ating element / coupling element is suitable.
It may be necessary to install an adapter between the actu-
ating element on the machine and the product.
7.5.2 Preparation of the product
The product is supplied in assembled condition.
No preparatory steps are needed to install the product.