Page 2 / 6
Chapter 01: Mounting dimensions
The surrounding concrete edge required is derived from the customer’s structural calculations and
formwork and reinforcement plans. This is not a constituent part of these assembly instructions.
As a guideline, we recommend the following minimum thicknesses
on all sides
in addition to the
external dimensions of the shaft cover indicated below:
For stationary traffic (e.g. car park): 80mm
For flowing traffic (carriageway): 120mm
These dimensions must be respected at the rear, including behind the hinge boxes!
Minimum quality of concrete: C35/45, respecting the customer’s specifications!
Status: 30.08.2022