7
Training
Employers are responsible for providing training to any employee who may be exposed to fall hazards. Training will enable an employee
to recognize and reduce fall hazards. Training must be conducted by a Competent or Qualified Person. Trainer and trainees must not be
exposed to fall hazards during the training course.
Inspection
Frequency
Shock absorbing lanyards must be inspected prior to each use and annually by an “Competent Person” other than the user.
To Inspect components
All components of the Shock Absorbing Lanyards must be inspected.
All snap hooks and karabiners on product must be able to self-close and lock.
All hardware must be free of corrosion, chemical attack, alteration, excessive heating, wear cracks, sharp edges, deformation, corrosion,
or any evidence of defect.
To Inspect Webbing
Bend a portion of the webbing 15-20 cm into an upside-down ‘U’ shape. Continue along all webbing inspecting for tears, cuts, fraying,
abrasion, discoloration, burns, holes, mold, pulled or broken stitches, or other signs of wear and damage.
Adjust all keepers, buckles, padding, and D-ring to inspect webbing hidden by these components.
Sewn terminations must be secure, complete, and not visibly damaged.
Check all buckles for damage, distortion, cracks, breaks, and rough or sharp edges. Inspect for any unusual wear, frayed or cut fibers, or
broken stitching of the buckle attachments. Make sure buckles properly engage.
Double-check the buckle locking mechanism by tugging on both halves of the buckle to make sure it is firmly connected and will not
disengage.
All markings must be legible and attached to the product.
All hardware must be free of cracks, sharp edges, deformation, corrosion, or any evidence of defect.
Cleaning, Maintenance, and Storage
Cleaning
Shock Absorbing Lanyards can be wiped down with a mild detergent and missed with a clean cloth to remove detergent. The hardware
can also be wiped down with a clean, dry cloth to remove grease or dirt.
