INSTALLATION
CONNECTION DIAGRAM
•Connect HDMI input ports to the signal source equipments such as
DVD player, Blue-ray player, Set-top box etc.
•Connect HDMI output port to the HDMI display.
•Connect to IR output port with the IR blaster cable
(
not included in the
package
）
for IR signal transmission. Place the IR blaster in direct line-of-sight
of the equipment to be controlled.
•Connect to the IR receiver cable (not included in the package) for IR signal
reception. An IR over HDMI adaptor is needed for connection. Make sure that
the remote being used is in direct line-of-sight of the IR receiver.
•You can control the device using a supplied Remote by pointing to the
built-in IR sensor.
•Connect to the IR extender iutput with the IR extender cable (optional)
if you need to extend the distance of using the remote.
•Plug the 5VDC power supply into the unit and connect the adaptor to
AC outlet.
DC 5V
IN
IR
OU
T
IR
CE
C
08
：
08
PLAY
06
：
08
PLAY
IN
IR
OUT
IR
C
EC
09
：
08
PLAY
07
：
08
PLAY
DC 5V
HDMI Input
HDMI Input 2
HDMI Input 3
HDMI Input 4
HDMI Input 5
IR Ext
Input2 Input3 Input4 Input5
Source
Selection
Input1
Output Power
IR Channel
IR
09
：
08
PLAY
