INSTALLATION
CONNECTION DIAGRAM
DC 5V
08
：
08
PLAY
DC 5V
DC 5V
HDBase-T
100Base-T
100Base-T
HDMI IN
HDCP
Link Mode
Power
IR-RX IR-TX
DC 5V
DC 5V
HDBase-T
100Base-T
100Base-T
HDMI IN
HDCP
Link Mode
Power
IR-RX IR-TX
Router
HDMI
1 to 4
IR
Output3 Output4
Input
Power Reset
Output1 Output2
HDMI Input
HDMI Output
HDMI In
HDBase-T Out1 HDBase-T Out2
DC 5V
NETWORK
100Base-T 1
100Base-T 2
HDBase-T Out3 HDBase-T Out4
DC 5V
DC 5V
HDBase-T
100Base-T
100Base-T
HDMI IN
HDCP
Link Mode
Power
IR-RX IR-TX
DC 5V
DC 5V
HDBase-T
100Base-T
100Base-T
HDMI IN
HDCP
Link Mode
Power
IR-RX IR-TX
•Connect HDMI input port to the signal source equipment such as DVD
player.
•Connect each HDBaseT output port to the HDMI to Cat5e/6/7 receiver
with Cat5e/6/7 cables to extend the signal up to 100m.
•Connect to IR output with the IR blaster cable
(
not included in the package
)
for IR signal transmission. Place the IR blaster in direct line-of-sight of the
equipment to be controlled.
•Connect to the IR receiver cable (not included in the package) for IR
signal reception. Make sure that the remote being used is in direct
line-of-sight of the IR receiver.
•Connect the LAN ports with Cat5e/6/7 cable to your router. The two LAN
ports in this system act as a single network switch. When one of the ports
is connected to the network, the other one will provide a live network
connection.
•Plug the 12V DC power supply into the unit and connect the adaptor to
AC outlet.
