6
Water Supply System
The water can be supplied continuously with a hose by attaching it to the
supplied hose adapter to the fill connection, or it can be filled manually.
With a continuous water supply connected, the float valve in the bottom
rises and drops with the water level. A linkage attaches the float to the
shutoff valve in the fill connection. As the water level rises to normal
operating level, the float valve shuts off the water supply. When the water
level drops, the float valve reopens to maintain a normal operating level.
After dis connecting the unit, the water reservoir can also be manually
filled with a hose or bucket; if a hose connection is impractical. Simply
remove any of the pad sections and place the hose, or pour the water,
directly into the water reservoir. When you fill the bottom manually it can
be filled to a higher level, but make sure someone monitors the filling
operation to avoid overfilling and flooding.
Note: Water damage due to overfilling is not covered by the warranty.
Float
Pump
