Haier XQS60-78H Скачать руководство пользователя страница 11

The capacity of washing  of  the machine refer to 
the largest weight of the standard laundries under 
dry condition  that can be washed  in one  time.
Laundries quantity in  one   washing   cycle    shall
be  lower  than   the    rated  capacity.   The  largest
capacity of  this machine  is  6.0 kg.
The thickness ,size , type of the cloth will influence 
the actual  washing capacity. It is suitable to put in 
reasonable amount of laundries and the laundries 
can be turned round in washing for one time 
washing.
Do not select the higher than "4" water level for 
laundries less  than 1.0kg ,so as to avoid splashing
 of water.

2 Put in the laundries

3 Put in the detergent

Access for detergent and washing powder

Access for softener

Detergent box

Put the  washing  powder and softener into  the  detergent  box
directly as Indicated  in the left figure.
After that, please close the detergent box. Refer to the following
list for the  usage of the  detergent :the standard  dosage of the
detergent and the water quantity.

How to use the whitener

Fill water to decided level .Dilute the whitener with
container. Pour it slowly into the washing tub.

Avoid using whitener on laundries with colour or 
pattern as they  are prone to lose colour.

The whitener shall not touch the laundries directly.
Refer to the user's manual for the usage and 
quantity of the whitener.

For powder whitener, please dissolve it before use.

How to use softener

See to the manual of softener for the usage
and dosage. When adding softener into the
softener inlet of washing powder box, note
that it shall not exceed the lower side of the cap.
Do not leave the softener for long period after
adding it into the box. Otherwise it may be
solidified and block the inlet.
As the softener is easy to solidify, please clean
the box frequently. (You shall clean it each time
you use reserve function).
Before use softener, you must select to sterilize
function.

How to use the washing powder

Directly dissolved in the machine (not applicable for fuzzy program and reserve wash)
1.Fill small quantity of water.
2.Add the powder Run for 30 seconds to dissolve it completely.
3.Put in the laundry. Select suitable water level.
The instant dissolving of the washing powder:
1.Prepare warm water of 30  and a container.
2.Add the powder while stirring to fully dissolve it In selecting
The super quick program, it is suggested to adopt liquid detergent instead of washing powder to guarantee the washing effect.
The powder is more prone to pollute the laundry than the detergent. Therefore please use it with suitable quantity.
It is suggested not to use high sudsing detergent.
Washing powder with poor quality or long time storage maybe caked. Please pay attention to cleaning the detergent box in time.

Содержание XQS60-78H




















Отзывы: