Haier XQS52-78 Скачать руководство пользователя страница 9

How to use the whitener

Standard usage of the detergent and water quantity

Laundries

 quantity

  (kg)

Water
 level

  Water 
quantity

      Common powder, 

Put the  washing powder and softener into the detergent  box
directly as Indicated in the left figure.
After that, please close the detergent box.Refer to the following
list  for  the usage of the  detergent :he standard  dosage of the
detergent and the water quantity.

How to use the washing powder

Fill water to decided level .Dilute the whitener with
container. Pour it slowly into the washing tub.

    Concentrated powder,

Add 40g in each 30L water Add 25g in each 30L water

3 Put in the detergent

Using process

Using process

Avoid using whitener on laundries with colour or 
pattern as they  are prone to lose colour.

The whitener shall not touch the laundries directly.

Refer to the user's manual for the usage and 
quantity of the whitener.

For powder whitener, please dissolve it before use.

Below 0.5

About  50L

About  45L

About  60g

About 37g

About  38L

About 51g

About  32g

About  28L

About  37g

About  23g

About  20L

About  27g

About  17g

About 47L

About  42L

About  56g

About 35g

About  32L

About 43g

About  27g

About  24L

About  32g

About  20g

About  16L

About  21g

About  13g

About  67g

About 42g

About  63g

About 39g

Access for detergent and washing powder 

Access for softerner

Directly dissolved in the machine (not applicable for fuzzy
program and reserve wash)
1.Fill small quantity of water.
2.Add the power.Run for 30 seconds to dissolve it completely.
3.Put in the laundry. Select suitable water level.
The instant dissolving of the washing powder:
1.Prepare warm water of 30 and a container.
2.Add the powder while stirring to fully dissolve it.In selecting
The super quick program, it is suggestedto adopt liquid
detergent instead of washing powder to guarantee the
washing effect.
The powder is more prone to pollute the laundry than the
detergent. Therefore please use it with suitable quantity.
It is suggested not to use high sudsing detergent.
Washing powder with poor quality or long time storage
maybe caked. Please pay attention to cleaning the
detergent box in time.

Detergent box

Содержание XQS52-78


















Отзывы: