11
6
Washing Methods
Control Panel
C
D
E
F
B
A
G
on
off
Speed bution
No spin
Power
500
800
XQG50-QF800TX(SS)
PROGRAMME SETTING (WITH POWER OFF)
strong action-cotton
1 pre-wash
2 wash
3 rinse
4 soften
5 spin
and
10 pre-wash
11 wash
12 rinse
13 spin
and
nomal action-synthetic
delicate action-wool
6 pre-wash
7 wash
8 rinse
9 soften
and
30
X
4
2
1
3
A Washing program
Turn the knob clockwise to set the desired wash program.
Caution: Turn off the power and turn the program knob clockwise
for setting desired wash program.
B Washing temperature
Turn the knob clockwise to set the desired temperature.
Temperatures between 30
o
C-90
o
C can be setted , Cold wash is
selected when the knob is set at *.
C Detergent distributor
Program discription are printed on the handle of the detergent
distributor,there are three detergent compartments numbered 1,2,3
Box 1: Pre-washing detergent
Box 2: Standard washing - extra-fast washing
Box 3: Softening agent, adjusting agent, perfume
Besides, there is a separate bleaching powder box 4. In case of
bleaching, put this box into compartment 1; remove this box from
compartment 1 if pre-washing is chosen. If bleaching is required,
place box 4 after the pre-washing is finished.
1. Collect clothes for one full wash load,
2. Do not overload the washing machine.
3. Pre-wash heavily soiled clothes.
4. Reduce the amount of detergent or choose fast or minimal washing programs for lightly
soiled clothes dirty.
5. Choose a proper washing temperature. Only exceed 60
o
C for heavily soiled clothes.
6. Do not use more detergent than required.
7. Softening agent makes clothes feel softer and easier to iron.
4. Washing temperature Setting
Set the washing temperature as required, otherwise, set at position * when heating is not
needed, (Maximum temperature for each program is displayed in the section setting)
5. Selecting the function button
Select function buttons as required (refer to the directions printed on the operation
panel) ,otherwise keep all the button released.
6. Washing
Press the power button and the washing machine will automatically commence
the programmed washing process.
7. End
Wait 2-3 minutes after the washing process is finished, press the power button again
to cut off the power supply. Open the door to take out the laundry. Turn off the tap and
unplug the washing machine.
Additional information
Energy and water saving during wash process