19
Note:
Hot water needs to be at a temperature of at least 120˚F – 140˚F.
(49˚C- 60˚C) for the soap to dissolve and to avoid soap residue
remaining on clothes.
4. Install the drain hose into a drain pipe. The drain hose must be placed into a
drainpipe at least 1
1/2
inches in diameter or directly into a sink. Use the “goose
neck” to hold hose in place. To avoid possible water back up, the drain hose
must reach height of at least 31
1/2
inches minimum and 40 inches maximum. If
the sink is less than 37
1/2
inches in height, route drain hose through the clip on
the back of the machine.
Note:
“Y Adapter” shown in above figure is only for illustration. It is not provided
in the box as an accessory. If you need to utilize this type of hookup, you can pur-
chase a “Y Adapter” from your nearest hardware store.
English
Drain Hose
Water Supply Hose
Hose Bend
Drain Hose
Goose Neck
Water Inlet
Hose Bend
SINK
Y Adapter
XQG50-QF800-MANUAL 10/22/01 11:40 AM Page 20