PROGRAM
SELECTION
WATER
LEVEL
SELECTION
RESER-
VATION
10
8
6
4
2
9
7
5
3
1
POWER
ON / OFF
POWER
ON / OFF
START
PAUSE
START
PAUSE
NORMAL
FIBRE
Fuzzy
COTTON
NIGHTTIME
WOOL
SILK
QUICK
JEANS
RESERVE
TIME
REMAINED
TIME
Program selection button
Start/Pause button
Push the On/Off button to switch
on the power.
When the power is on, push it again
to switch off the power.
Push the On/Off button to switch
on the power. If the start/pause
button is not pushed, the washing
machine will automatically switch
off the power after 5 minutes.
Page16
In normal operation mode, the
reserve indicator light is off.
The time remain indicator light
is on. The digitron displays the
time remained (in minute)
before the washing is finished.
Push down the reserve button,
the reserve indicator light is on.
The digitron displays the
reserve time of finishing
washing (in hour). When the
machine is started, the reserve
indicator light is on, indicating
that the reserve function is
running.
After the power is
switched on, push it to
start the machine
During working, push
it to pause working.
During pause, push it
to resume working.
Water level selection button
Following automatic programs are
available for selection
Applicable situation
Standard Common washing
Nighttime
Suitable for low noise wash
during the night
Quick
Quick wash of the laundry
under 1 kg with light soil
Jeans
Washing the biger and thicker
laundries
Fiber
Washing the iber laundries
Cotton
Wool
Silk
Washing the cotton textiles
Washing the woolen textiles
Washing the silk textile
Reserve/remain time digitron
Reserve button
Power On/Off button
During sensing, it displays --
During reserve process, it displays the remained
reserve time (in hours).
During runtime of program, it displays the remained
time (minutes). If the remained time exceeds 99 minutes,
it adopts A at tens place to represent 100 minutes, b to
represent 110 minutes, C to represent 120 minutes. For
instance, A8 represents108 minutes, b8represents118
minutes, C8 represents128 minutes.
In case of abnormal phenomenon, it displays the
abnormal symbol (see to Page 16)
The washing machine can detect the laundries auto-
matically. After detection, it will set the water level to
suitable value among 4, 6, 8,and 10 automatically.
You can also set water level by yourself. After the
machine is started, it will not set water level auto-
matically. You shall push the start/pause button to
make new setting.
If there's water inside the tub, the machine cannot
detect the laundries and will display water level 6 .
If quick program is selected, it will display water level
2. When water level 2 is reached in water filling, it will
perform washing while filling water. When water level
4 is reached, it will change to normal washing.
During wash and rinse process, you can push and
hold the water level button to add water. When you
release the button, or it reaches the overflow water
level, the machine will stop adding water.
The water level decided may be different from actual
value because of the different moisture level of the
laundries.
Program
Using process
Using process