manualshive.com logo in svg

Haier XQB50-10, Руководство по обслуживанию

Поделиться
Скачать
Haier XQB50-10 Скачать руководство пользователя страница 12

11

1. Trouble alarm and solve method

Wash test program

Spin test  program

Buzzer test program

2. Test program (test without water)

Push and hold the 

PROGRAM SELECTION

  and 

PROCEDURE  SELECTION

  buttons,  then push 

down the power  switch  to enter buzzer Test program.  Push the 

PROCEDURE SELECTION  to 

select wash test program and spin test  program.

Test

name

Test content

Buzzer
Test
program

The buzzer rings once. All of the indicators flash. After 3 seconds, nixietube displays 
88, all of the indicators flash and the buzzer rings intermittebtly 3 times (0.3s 
connected, 0.3s shutoff). The power is switched off automatically after finishing.

The  WASH  indicator flashes

the STANDARD  indicator is on. Run washing 

with water for 5 minutes. During washing, you can change the current selection by 
the PROGRAM SELECTION button 

Wash
Test
program

Spin
Test
program

The STANDARD  indicator is on; WASH and RINSE  indicators flash. Run spinning 
without  water for 5 minutes. The alarm during that procedure is the same as the 
alarm in normal spinning program.

Phenomena

The reason

How to settle

The top lid is not closed

Is the drain hose put down?

Is the drain hose blocked by 
foreign material?

Are the laundries put slantingly?

Are the laundries slanting in 
spinning?

Is the machine slanting?

Is the machine slanting?

The water tap is not open

The water inlet valve is blocked

The water pressure is too low 
and  the current is too small

Is there power failure?
Is the power plug loose?

Is the jointer screw of the water 
inlet hose is loose or twisted 
awry?

The water faucet leaks

There's abnormal sound inside the 
machine

The machine does
 not act

Close the top lid

Put down the drain hose. Open 
and close the top lid once.
Clean the foreign material. 
Open and close the top lid once.

Re-order the laundries. Close the 
top lid.
Level the machine in right position. 
Open and close the top lid once.

Open the water tap. Push the 

START/PAUSE

 button.

Clean the water inlet valve. 
Push the 

START/PAUSE

 button.

Wait for the normal water 
pressure before use.

Use it when the power is on.
Insert the power plug tightly.

Level the machine properly.
Re-order the laundries.

Fasten the jointer screw 
properly.

Does the water level arrive at 
the set water level?

Affusion to the set water level.

Is the power plug loose?

Insert the power plug tightly.

Is the top lid closed?

Close the top lid

Are the laundries put orderly?

Put the laundries orderly.

Not spin

Not wash

Buzzing upon reservation starts,
Nixie tube indicates "E0"

Safety switch actuates, not 
spin, (after self-correction 
twice), nixie tube displays  
"E3", buzzing

No or slow water filling (not 
reaching the level in 15 min), 
nixie tube indicates "E4", 
buzzing

No or slow drain, nixie tube 
indicates "E1" , buzzing.

The top cover leaves open 

Close the top lid

Running pauses during spin, 
nixie tube indicates "E2”, buzzing

 

 Automatic Washing Machine

Model: XQB50-10

Maintenance service and trouble shooting

Содержание XQB50-10



















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды