Starting the Appliance
Starting a wash cycle
- Make sure that the plug for the appliance
is inserted into the wall socket.
- Make sure that the water supply is turned
on to full pressure.
- Load the dishwasher (see the section
entitled,"Loading the Dishwasher").
- Pour in the detergent (see the section
entitled,"Salt,Dergent and Rinse Aid").
- Turn the knob located on the right of the
control panel in the clockwise direction
until the number or symbol for the cycle
setting is aligned with the reference mark
(see the section entitled,"Wash Cycle Table").
- Press the ON-OFF button,and the ON-OFF
light will turn on.At this point,the wash cycle
will begin.
Cancelling or modifying a wash cycle
setting
Press the ON-OFF button and the ON light
will turn off. Rotate the knob in the clockwise
direction to the desired cycle setting (see the
section entiled,"Starting a wash cycle...").Then,
turn the dishwasher back on using the ON-OFF
button.
Wash Cycle adjustment Buttons
-
It is important to try and run the dishwasher
when it is fully loaded to save on enery.In
order to prevent odors from forming and food
from caking onto the dishes,you can run the
hold cycle.
- Choose the right wash cycle: the choice of
cycle depends on the type of dishware, cook
ware and utensils being washed and how dirty
they are.
Energy Saving Tips
- Use the right amount of detergent: if you use
too much detergent, the result will not be
cleaner dishes,but,rather,a greater negative
impact on the enviroment.
- There is no untility in rinsing dishes ,cook
ware and untensils before placing them in the
dishwasher.
At the end of the wash cycle
When the knob stops turning and is aligned
with a STOP mark(see figure),the cycle has
finished.Turn off the appliance using the ON-
OFF button,turn off the water supply and open
the door of thr dishwasher.
Wait a few minutes before unloading the dish-
washer to avoid handling the dishes and uten-
sils while they are still hot and more suscep-
tible to breakage.They will also dry better.
STOP
R
This button(see "close-up View - Control
Panel",letter"F ")is used for normally dirty
dishes, pots and pans.It is standard daily cycle.
