Haier WD-8888-71, Руководство по обслуживанию, Страница: 5 / 30

5
SAFETY PRECAUTIONS
Please plug the plug on receptacle.
Be sure to use single-phase three pins
power receptacle. Ensure the earthling
prong of the power receptacle is earthed
reliably. Use leakage protector if possible.
In normal usage of the washing machine, the
power plug shall be ready to be pulled or
plugged with hand. Be sure to pull the plug off
and close the water faucet when encountering
power failures, delivering the machine setting,
the machine idle or cleaning the machine. Do
not plug or pull the power plug with wet hand.
Do not bend, stretch, twist, bind the power cord by force, or reform it. Do not press or clamp
it with heavy items. If the power cord and power plug are bad, or the receptacle is loose, be
sure to have it replaced by the technicians of our special shop or
our agent, or the after-sales service department to avoid any
risk. Keep the prong of the power plug clean. If
dust
is found on the power plug, please wipe it off with dry clothe.
In case the washing machine is installed on
ground with carpet, be careful not to block
the ventilation hole with carpet.
• Do not put any hot or heavy items
(such as the kettle with hot water) on
the washing machine.
Do not put the machine at damp place like
the bathroom. Never wash it with water.
Do not put wet laundries on the control
panel coating.
• Keep the machine away from direct
sunlight and heat source like the
heater
.