° ² × ° Ë µ Ã ÷
8
Schematic drawing of the indoor pipeline and wiring
Installation instructions
Solar
water
heater
Tap water
Hot water
O
v
e
rf
lo
w
p
ip
e
Electric heater wiring connection
1. Twists 4 bolts of the wiring cover, takes out the
wiring cover, and take down the insulating clamp .
2. Put the 3
1.0mm power line through the line
protection seal packing collar. According to electric
heater connection diagram, connect power line's
brown or the red to live line marking
L
place, the
yellow green line connect grounding marking place,
blue line connect to the neutral line marking
N
place.
Then with the insulating clamp to be fixed the power
line, fix up the cover with the screw .
Leakage protect plug connection
1. Twists 4 bolts of the leakage protect plug, takes out
the top cover
2. Twists 3 bolts of the power line posts, takes out the
spare 3 posts. presses separately with the specil
line ball pliers power line's 3 lines on the spare post,
then presses the post with the same color in the same
place and uses the bolt to fasten, if live line for red, then
the red line post should with brown post docking.
3. Wraps up the power line the active line buckle then put the
line buckle to the outlet line hole place. installs the top cover and fasten it with 4 bolts .
Electric heater wiring
connection diagram
Brown line
Blue line
Installing the electric heater
Leakage protect plug
connection diagram
2
Yellow
green line
