background image

 

IMPORTANT SAFETY INSTRUCTIONS 

 

Read all of the instructions before using this appliance. When using this appliance, always 

exercise basic safety precautions, including the following: 

 

1)Save these Instructions ---the safety and operating instructions should be retained for future 

reference. 

2)All warning on the appliance and in the operating instructions should be  followed. 

3)Cleaning ---  Unplug from the wall outlet before cleaning. Do not use liquid cleaners or aerosol 

cleaners. Use only dry cloth for cleaning. 

4)Attachments ---do not use attachments not recommended by the manufacturer as they may cause 

hazards. 

5)Water and moisture -- do not place this product near water, for example, near a bathtub, wash bowl, 

kitchen sink, laundry tub, in a wet basement, or near a swimming pool. 

6)Accessories ---do not place this unit on an unstable cart, stand, tripod, bracket, or table. Use only with 

a cart, stand, tripod, bracket, or table recommend by the manufacture, or sold with the unit. 

7)Ventilation ---Slots and openings in the cabinets and the back or bottom are provided for ventilation. 

These openings must not be blocked. In a built in installation such a bookcase or rack do not install 

 

FC C STATEMENT

 

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rule. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, use and can radiate 
radio frequency energy and, if not installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no guarantee that interference with 
not occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is 
encourage to try to correct the interference by one or more of the following measures: 
      *Reorient or relocate the receiving antenna. 
   *Increase the separation between the equipment and receiver. 
   *Connect the equipment into an outlet on a circuit different from that to which the receivers 
connected. 
      *Consult the dealer or an experienced radio/TV technician for help. 

This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two 

conditions: (1) This device may be not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation. 

FCC CAUTION: 

To assure continued compliance and possible undesirable interference, the provided ferrite cores must 
be used when connecting this plasma display to video equipment; and maintain at least 40cm spacing 
to other peripheral device. 

CANADIAN NOTICE: 

This Class B digital apparatus compiles with Canadian ICES-003. 

Содержание NS-LCD19W-09































































Отзывы: