![Haier MWG100814TW / B Скачать руководство пользователя страница 26](http://html.mh-extra.com/html/haier/mwg100814tw-b/mwg100814tw-b_user-manual_137419026.webp)
25
the opening.
Fan
The fan will automatically start when
heat rises from range surface units or
burners. This protects the microwave
oven from excessive temperature rise.
The fan will stay on until the
temperature decreases. It cannot be
turned off manually during this time.
For other uses, select either HI or LO speed.
Light
1. To replace light bulbs, first
disconnect power to the oven at the
circuit breaker panel or by
unplugging.
2. To release cover, remove the screw
on the light cover. ( See illustration.)
3. DO NOT USE A BULB LARGER
THAN 30 WATTS.
4. Close light cover and secure with
screw removed in step 2.
CAUTION: Light cover may become
very hot. Do not touch glass when light
is on.
C
Ch
ha
arrcco
oa
all F
Fiilltte
err
Charcoal filter is used for nonvented,
recirculated installation. The filter
should be changed every 6 to 12
months depending on use.
1. Disconnect power to the oven at the
circuit breaker panel or by
unplugging.
2. Remove the louver mounting screw
from the top center of the louver
and push down carefully on the tab
at each end of the louver to
disengage it.(See illustration.
3. Pull the louver away from the unit.
4. Change the charcoal filter.
5. Carefully push the louver back into
place and replace the screw remove
in step 2.
O
Ovve
en
n LLiig
gh
htt
Remove the louver per instructions 1-3
above and charcoal filter, if used.
1. Open light cover located behind
filter mounting by carefully pulling
up on the front edge.
2. DO NOT USE A BULB LARGER
THAN 30 WATTS.
3. Replace the oven light cover by
carefully pushing into place.
Replace the charcoal filter, if used.
Push the louver back into place and
replace the louver mounting screw.
Grease Filter
Tab
Light cover
Screw
Light Bulbs
English
Screw
Oven Light
Charcoal fliter
Hood Louver