Functions
Preparation
1.Power supply
Plug in the power supply 220-240V~/50Hz
2.Water supply
Turn on the tap ensure that the water in clear.
Caution:Before staring the washing machine turn on the water
faucet to ensure the water faucet and the water inlet hose are
connected correctly and do not leak.
4.Detergent selection
Only special low foam detergent should
be used in automatic drum washing
mashine,form blended or wool fabrics
special deter-gent should ne used.dry
clearning solvent should not be used
such as trichhloroethy-lene or alike
(caution :load the required amount of
detergent only).
3.Laundry treatment
Sort out clothes according to type and extent of dirt.There are
three types of clothes:cotton,synthetical and woolen (silk) fabrics.
Separate white clothes from colored.If whites and coloreds
are combimed for one load,make sure the coloreds are colorfast.
-Clothing with frayed edges or yams should be put in a wash
bag or special bag before washing.
-repair damged clothing,lose buttons or damaged zips
and hooks before washing.
-Bed sheets and table ware should be loosely loaded and not
folded.
This washing mashine is for househould use and designed
for mechanically washable clothes.When washing,separate
unwashable clothes with reference to clothes labels.
Note.
If Program key is turned after reservation time is set and before program starts, the
reservation will be automatically cancelled.
When reservation feature is activated, the washing start time is fixed. There will be some
difference between the reserved time and the actual program completion time due to different
water inlet time and load distribution condition during spin
-
dry process.
E. LCD
LCD is a window to display information including washing status, washing progress,
reservation time, remaining time, heating temperature, spin
-
dry speed, load selection and error etc.
as well as to display additional features such as power clean, super clean rinse and foaming
auto
-
check etc.
F. Start/Pause Key
When the washer is energized, select the desired washing program and press the Start/Paus
key. The indicator lamp on the upper left corner of the key will illuminate to indicate that the
washer has started operation. If it needs to pause the washing process, simply press the Start/
Pause key and the indicator lamp and remining time display will blink and the washer enters into
condition. Press the Start/Pause key again to resume washing process.
(Note: Press the Start/Pause key only after the desired program and feature are set.
G.
H. Temperature Selection Key
Press the key and LCD will display the selected heating temperature, which is adjustable as
needed. Note: 20
o
C means cold water washing and no heating is involved.
.
I.
Spin Speed Selection Key
Press the key and LCD will display the selected spin
-
dry revolution speed, which is adjustable
as needed. (When No Spin
-
dry feature is selected, the time will decrease correspondingly
.)
J.
Load Selection key
Turn the Program Knob to select the desired program (see Program Setting Guidance Table)
Press the key and manually select different programs and power-saving and water-seaving fea-
ture based on the volume of load. LCD will display L-1(2,3,4,5,6), indicating the washing load is
1(2,3,4,5,6) kg and program time will change accordingly. (The feature is not
available in
Wool,Cashmere, Silk, Speedy, Drainage Only and Spin Only Program. Only L
–
1, 2, 3 are
available for Chemical Fiber program. )
Rinse Hold Key
