![Haier M1121 Скачать руководство пользователя страница 7](http://html.mh-extra.com/html/haier/m1121/m1121_user-manual_135284007.webp)
7
· Confirm phone is turned off
· Turn phone back upwords, hold phone, see from the back of phone, there is a opening at side
of phone, move outside at the opening to remove back cover of phone.
· Remove battery of phone.
· Make metal side of SIM card toward down (facing phone), bevel of SIM card is at left-up
corner, insert the SIM card into slot flatly.
· Push inside flatly until it reaches the end.
· Install battery
· Cover back cover (aim arc side of back cover at arc side of phone and press the two corner of
straight side tightly).
Remove SIM card
· Remove back cover and battery of phone after it is turned off.
· Press SIM card with finger and pull it out flatly.
· Remove SIM card.
· Install battery and cover the back cover.
1.5 Battery charge
· Plug the pin charger into 220AC power socket.
· Plug adapter of charger into the interface at the bottom of the phone (the side with arrow sign
up), plug adapter into interface socket.
· When phone is turned on, battery stick in battery icon on screen start to scroll, which showsn
that mobile is in charging state. When phone is charged under off state, screen will display
charging act.
·After charging is complete, battery icon stops to scroll, and now you can take it out from phone
interface.
Note: the only way to stop charging when charging starts is to plug charger out, please try to use
power socket which is convenient for plug in and plug out.
1.6 SAR
The SAR limit of USA (FCC) and Canada (IC) is 1.6 W/kg averaged over one gram of tissue.
Device types M1211 has also been tested against this SAR limit. The highest SAR value reported
under this standard during product certification for use at the ear is 0.273 W/kg and when properly
worn on the body is 0.433 W/kg. This device was tested for typical body-worn operations with the
back of the handset kept 1.5cm from the body. To maintain compliance with FCC RF exposure
requirements, use accessories that maintain a 1.5cm separation distance between the user's body
and the back of the handset. The use of beltclips, holsters and similar accessories should not
contain metallic components in its assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure requirements, and should be avoided.
1.7 Accessories
The M1211 phone support below accessories, they are only optional, you can buy from your
vendor.
Содержание M1121
Страница 1: ...User Guide of M1121 Phone ...