Haier LMA9020WGAB0 Скачать руководство пользователя страница 6

6

Chapter 3: SAFETY PRECAUTIONS

3-2. Warning and Cautions

Please insert the power cord into special receptacle with rated voltage. Be 

sure to use single-phase three pins receptacle.The earthing terminal of the 

receptacle must be earthed reliably. If possible,please adopt electric leakage 

protector.
The washing machine must be positioned so that the plug is accessible. Be 

sure to pull the plug off and close the water faucet in following cases: power 

failure, delivering the machine, setting the machine idle or cleaning the 

machine.
Do not plug or pull the power plug with wet hand.
Do not bend ,extend, twist, bind by force. Do not press or nip it with weight.
Keep the pin of the power plug clean, if the power plug is polluted with dust, 

please wipe with dry cloth carefully.
If the supply cord is damaged, it must be replaced by the manufacturer or its 

service agent or a similarly quali

ed person in order to avoid a hazard.

Do not let the machine share one receptacle with other

electric appliances. If the plugging into the receptacles 

loose, do not use the plug any more.

In case the washing machine is installed on ground

with carpet, do not block the ventilation hole 

with carpet. Ensure carpet does not obstruct the 

opening in the bases. 

Do not put the machine at damp place like the 

bathroom. Never wash it with water. Do not put wet 

laundries on the control panel.

Do not stretch hands into the working machine. It is 

dangerous even if the rotation is slow. Take special 

care of the children.

Do not put any hot or heavy items (such as the kettle 

with hot water ) on the washing machine.

Do not wash water-proof laundries like the raincoat, 

bike covers etc. to avoid abnormal vibrations in 

spinning. Wash the clothes

 that can float on the 

water surface easily, please be careful especially,

for fear damage.

!

3-1. Safety

Service Manual

Model No:

Issue

Rev.

Service Manual

MABE500-1789

Содержание LMA9020WGAB0

























Отзывы: